Bases for Finbrellas in Commercial Environments. A Guide to Selection.

Our most popular commercial sized umbrellas are the F-220 (2.2m diameter), F-280 (2.8m diameter) and F-330 (3.3m diameter).

Fixed Position units (installation required):

F-220 / 280 / 330 in place on a Fixed 'Stalk' Spigot.

This has the following advantages: 

• Lowest comparative price
• 125mm OD footprint on the floor
• The 'Stalk' spigot has no moving parts so there is no risk of (staff) user error
• Staff and customers don't have the option to move / locate the Finbrellas so it can be optimised and 'set' for your beer garden
• If the 'Stalk' spigot needs to be removed then the 3 x M12 bolts must be unscrewed from the ground

F-220 / 280 / 330 in place on a Fixed 'Camlock' Spigot.

This has the following advantages: 

• 125mm OD footprint on the floor
• The Camlock Spigot can be readily removed with a half turn of an 8mm Allan Key leaving only a 125mm OD x 8mm tall (with 4mm bevel) Fixed Camlock Plate (FCLP) fixed to the ground.
• The FCLP poses no trip hazard risk
• Multiple FCLP can be installed around the venue so the shade can be moved / optimised for events, afternoon sun, etc. 

Movable units:

F-220 / 280 / 330 on Movable Low Profile Galvanized Steel Base (MLPB).

This has the following advantages: 

• No installation required. ‘ready to go' 
• Very readily movable by staff and customers
• Low profile bases (12mm) so negligible trip hazard
• Can be transported and used at events, festivals, pop ups, etc

F-220 / 280 / 330 on Movable Paver Base (MPB):

This has the following advantages: 

• Cost effective 'movable option' ideally for use under tables 
• No installation required. 'ready to go' 
• Movable by staff 
• Can be transported and used at events, festivals, pop ups, etc

F-330 on Movable Ground Spike Base (MGSB):

This has the following advantages: 

• Most cost effective 'movable option' ideally for soft ground eg; grassed / sandy areas
• Can be transported and used at events, festivals, pop ups, etc